5_Product_Shandong Lufa New Materials Group

FeNi20

Ferronickel is a nickel iron alloy with a nickel content of 20% -60%. The melting point of nickel iron is 1430-1480 degrees, and the density is 8.1-8.4. Mainly used as a nickel additive in steelmaking and cast iron. According to international standards (ISO), nickel iron is divided into FeNi20 (15%~25% Ni), FeNi30 (25%~35% Ni), FeNi40 (35%~45% Ni), and FeNi50 (45%~60% Ni) based on its nickel conte...

Get Quote Email Tel/Wechat/Whatsapp

FeNi 30

Ferronickel is a nickel iron alloy with a nickel content of 20% -60%. The melting point of nickel iron is 1430-1480 degrees, and the density is 8.1-8.4. Mainly used as a nickel additive in steelmaking and cast iron. According to international standards (ISO), nickel iron is divided into FeNi20 (15%~25% Ni), FeNi30 (25%~35% Ni), FeNi40 (35%~45% Ni), and FeNi50 (45%~60% Ni) based on its nickel conte...

Get Quote Email Tel/Wechat/Whatsapp

FeNi 40 HC

Nickel iron is a nickel iron alloy with a nickel content of 20% -60%. The melting point of nickel iron is 1430-1480 degrees, and the density is 8.1-8.4. Mainly used as a nickel additive in steelmaking and cast iron. According to international standards (ISO), nickel iron is divided into FeNi20 (15%~25% Ni), FeNi30 (25%~35% Ni), FeNi40 (35%~45% Ni), and FeNi50 (45%~60% Ni) based on its nickel conte...

Get Quote Email Tel/Wechat/Whatsapp

FeW 70

ferrotungsten (with a tungsten content of 70% -80%) and is an alloy composed of tungsten and iron, used as an alloy additive in steelmaking. There are two commonly used types of tungsten iron, which contain 70% and 80% tungsten. Density (20 ℃) 19.3g/cm3. Melting point 3400 ℃. Boiling point 5555 ℃.

Get Quote Email Tel/Wechat/Whatsapp

FeW 80

Ferrotungsten (with a tungsten content of 70% -80%) and is an alloy composed of tungsten and iron, used as an alloy additive in steelmaking. There are two commonly used types of tungsten iron, which contain 70% and 80% tungsten. Density (20 ℃) 19.3g/cm3. Melting point 3400 ℃. Boiling point 5555 ℃.

Get Quote Email Tel/Wechat/Whatsapp

Sponge titanium

Sponge titanium is the raw material for titanium processing materials. Generally, it is a light gray particle with a clean surface and no visible inclusions. It also includes defective sponge titanium blocks, such as burnt sponge titanium blocks, oxidized sponge titanium blocks with obvious dark yellow and bright yellow traces, oxidized and nitrogen rich sponge titanium blocks with dark yellow and...

Get Quote Email Tel/Wechat/Whatsapp

FeTi block

Ferrotitanium is an iron alloy composed mainly of titanium and iron. According to the different titanium content, there are three main varieties: FeTi30 (containing Ti25.0% -35.0%, Al<8.5%, Si<5.0%), FeTi40 (containing Ti35.0% -45.0%, Al<9.5%, Si<4.0%), and FeTi70 (containing Ti65% -75%, A10.5% -5%, Si<0.5%). In addition, there are various titanium containing composite alloys such as Ti Si Fe, Ti ...

Get Quote Email Tel/Wechat/Whatsapp

FeTi particles

Ferrotitanium is an iron alloy composed mainly of titanium and iron. According to the different titanium content, there are three main varieties: FeTi30 (containing Ti25.0% -35.0%, Al

Get Quote Email Tel/Wechat/Whatsapp

FeTi sheet

Ferrotitanium is an iron alloy composed mainly of titanium and iron. According to the different titanium content, there are three main varieties: FeTi30 (containing Ti25.0% -35.0%, Al

Get Quote Email Tel/Wechat/Whatsapp

Message