4_Product_Shandong Lufa New Materials Group

Iron-niobium alloy 70

Get Quote Email Tel/Wechat/Whatsapp

Metallic silicon 421

Definition of metallic silicon: Metallic silicon, also known as crystalline silicon or industrial silicon, is primarily used as an additive in non-ferrous alloys. Silicon is a non-metallic element, appearing grayish with a metallic luster, and is hard yet brittle. It constitutes approximately 26% of the Earth's crust by mass; its atomic weight is 28.80; density is 2.33 g/cm³; melting point is 1410...

Get Quote Email Tel/Wechat/Whatsapp

Manganese 95

Manganese content is synthesized by subtracting the tabulated impurity content of the product by the subtraction method, i.e. w(Mn)=100-{w(C+S+P+Si+Se+Fe)} (%)

Get Quote Email Tel/Wechat/Whatsapp

Manganese 97

Manganese content is synthesized by subtracting the tabulated impurity content of the product by the subtraction method, i.e. w(Mn)=100-{w(C+S+P+Si+Se+Fe)} (%)

Get Quote Email Tel/Wechat/Whatsapp

Manganese 99

Manganese content is synthesized by subtracting the tabulated impurity content of the product by the subtraction method, i.e. w(Mn)=100-{w(C+S+P+Si+Se+Fe)} (%)

Get Quote Email Tel/Wechat/Whatsapp

magnesium ingot

Magnesium ingot is a metallic material that is made from magnesium with a purity of 99.9% or more. Magnesium is a lightweight, soft metal with good electrical and thermal conductivity, and has a wide range of applications in aerospace, automotive, electronics, and optics.

Get Quote Email Tel/Wechat/Whatsapp

Zinc Ingot

Zinc ingots are widely used in die-casting alloys, battery industry, printing and dyeing industry, pharmaceutical industry, rubber industry, chemical industry, etc. Alloys of zinc and other metals are also widely used in electroplating, spraying and other industries.

Get Quote Email Tel/Wechat/Whatsapp

Lead Ingot

Lead ingot is rectangular, with prominent ears at both ends, blue-white metal, softer.1、The surface of lead ingot shall not have slag, particles of oxygen, inclusions and foreign pollution.2、The lead ingot shall not have cold segregation, and shall not have flying edge burrs larger than 10mm (trimming is allowed).Lead ingots are divided into 5 grades according to their chemical composition, and th...

Get Quote Email Tel/Wechat/Whatsapp

FeNi 50 LC

Nickel iron is a nickel iron alloy with a nickel content of 20% -60%. The melting point of nickel iron is 1430-1480 degrees, and the density is 8.1-8.4. Mainly used as a nickel additive in steelmaking and cast iron. According to international standards (ISO), nickel iron is divided into FeNi20 (15%~25% Ni), FeNi30 (25%~35% Ni), FeNi40 (35%~45% Ni), and FeNi50 (45%~60% Ni) based on its nickel conte...

Get Quote Email Tel/Wechat/Whatsapp

Message